Low cost of two part pu machine conveyor pu machine ab cast pu machine
Where to buy polyurethane resin machine ?
We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.
Potting is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
II.Main Function:
1.Automatic metering,mixing and potting by Manually
2.Automatic alarm sensor for short or full of material
3.Gluing speed and time adjustable
4.Good Suction Value
5.Self cleaning
6.Material tank stirring (Optional)
7.Glue tank Vacuum Defoaming and Auto filling(Optional)
8.Glue barrels,metering pump,glue pipe can be heating (Optional)
III.Features and Benefits:
Ø Strong electric control system: using imported Panasonic PLC, the original motor, touch screen, electronic components, wiring, dust-proof, anti-static system are designed according to the national standards.
Ø Glue Dispensing Accuracy: high precision Daheng Double Cylinder Plunger Pump, large glue amount and glue mixing ratio with new technological breakthroughs.
Ø A, B glue liquid level alarm function: Can avoid the glue supplying breaks
Ø Unique timing glue outputting system: Can prevent the glue curved while workers short break, shifts switching.
Ø B Glue curing agent monitor: Prevent the B glue breaking to cause curving problems
Ø Multiple filtering system: From the glue tank to glue head, with multiple filters, to prevent the impurities to glue tank and cause rubber hose or pump stuck
Ø Equipped with A glue heating device: heat and increase the liquidity of glue while using in a low temperature environment.
Ø Automatic cleaning system: using two tanks to store, only dynamic mixing the glue at the mixing tube. Easy to clean after usage.
Ø Dispensing, potting all in one design, automatic operation. Mixing and using at the same time.
Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping. 3. Core metering pump specially design for different material from low to high viscosities. 4. Mix glue A & B more evenly; no more or no less for agent B. Working principle : Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data. Tank system technology: 1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank . 2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature. 3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level . 4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure . 5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve. 6 Tank with heater which can preheat materials to assure good flowability . 7 Tank with artificial feeding mouth that can be added glue appropriately by hand . 8 Tank with silica-dryer which can prevent material especially PU from crystallization .
Application:
Multi-purpose, such as led strip light,Power supply, LED driver, Capacitor; transformer, sensor etc.
Optional Function:
1, vacuum
2, heating
3, Gear pump & Plunger piston pump&Screw pump are available; Customers can choose to needs.
Valve technology
1. Two cylinder plunger pumps work by durable motors. 2.The biggest flow volume :24g/s,Repetition accuracy:0.2g. 3.Also Suitable for high viscosity glue: 50cps~35000cps. 4. Suitable for big flow dispensing or slight flow dispensing. 5. Suitable for frequent start and stop dispensing. 6. Anti-wear, Anti-corrosion, super long life time.
| Model & Type | PJL-1200 Full Auto Gluing Machine Dispenser |
| Certificate | CE, SGS |
| Dimension | 1500x1200x1500mm |
| N.W. | 260kg |
| metering pump | Gear pump/Screw pump/plunger pump |
| Flow Speed | 0-66g/5s, or customized |
| glue viscosity | 0-30000 Cps |
| Glue & Ratio | 1:1 to 10:1, Epoxy, Silicone, PU, UV |
| Repeatability | +/-0.02g |
| Accuracy | +/- 1% |
| Power | AC220V or AC 380V |
| Total Power Consume | 3kw - 5kw |
| Additional Function | Heating, Vacuum, Self-refilling, Self-cleaning |
| Application | LED module, display, LED lights, power supply, driver, motor, sensor, and transformer and so on^
|
